2200mah Lipo Box
Giữ pin đúng vị trí
151
Lượt Xem
8
Lượt Thích
21
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
Nội dung được dịch bằng AI
Fits my 2200mah 50c 3S batteries laying on edge. It has an inset on the bottom and sides to allow for placement of a Velcro strip. Printed in PLA @25% infill. It printed the holes fine without support. Simply glue it in the spot of your choosing.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
Model files
Loading files, please wait...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!