Simple ceiling cable holder
Một giá đỡ cáp nhỏ cho một đèn treo. Vít vào một phích cắm vào trần với một ốc vít 5 mm. Nó có thể giữ một cáp tối đa 8 mm.
Mô tả
I made this model to be able to hold a lamp hanging from the ceiling. The cable it is holding comes from a ceiling rose, passes through the holder and hangs down. The holder is held up by a 5mm screw that goes into a plug set into the ceiling. It can hold 8mm cables max.
One problem with it is that, if the lamp that the cable is holding is heavy, it might pull the cable taut. This is why I used a small zip tie on the cable, to keep it from being pulled down further.
I made this model to be able to hang my PRINTAROON lampshade from the ceiling.
If you have any questions, shoot me a message!
Print guide
Print the model upright, with the largest hole on the bed. No support. I added 10 top layers to
Giấy phép
