Drawer Divider
Tôi đã phối lại phần ban đầu: https://www.printables.com/de/model/638685-divider-diy-storage
2.7K
Lượt Xem
77
Lượt Thích
463
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
Nội dung được dịch bằng AI
I created two “versions” with different sizes:
120x55mm 355x55mm
120x70mm 355x70mm
The connector is 2mm higher than the original one.
If you use the connector cut off a little piece on the end of each divider to make it smaller.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
Model files
Loading files, please wait...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!