Hooks for utility shelves
Móc trái và phải cho một bộ kệ tiện ích thép.
503
Lượt Xem
22
Lượt Thích
307
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
These hooks fit the corner supports of some steel utility shelves.
Print with supports in the orientation provided, in order to provide the highest strength.
I recommend using a 0.25mm layer height with 3 walls and 40% infill (the included g-code files use modifiers to print only a small section at 40%).
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — NoDerivativesCC-BY-NC-ND
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!