Badgey from Star Trek: Lower Decks

Made with blender with surface subdivision modifier, i enjoyed every moment of creating this and i hope you like it too!

MULTICOLOR or SINGLE

optimized for bambu lab ams. you need 2 ams to print this full color, or use the 4 color version which has the tongue brown like shoes & gloves - alternatively you can do like i did: make shoes and gloves yellow and keep the red tongue, then manually paint the brown parts

There is also a .3mf for PRUSA MMU, bit i have not tested it since i do not have it.

print at 0.2 and use a brim if needed. hands and body needs TREE/ORGANIC supports

i printed mine in petg. since i only have 1 ams i manually painted the shoes and gloves brown.

for single color printing download the MMU version and open in prusaslicer.

INSTRUCTIONS

• Join the body with superglue, use clamps to hide the seam better. Let dry for 15 mins
• Turn the body upside down and glue the legs, the flat part should be facing the back. Let dry for 15 mins
• Check the orientation of the arms and hands, the thumb faces up and the flat part of the arm faces back
• glue the hand to the arm and then the arm to the body… the body has little slots where the hand sits to help orientating. don't glue the hand to the body it is not needed and will look bad. Let dry for 15 mins each arm. do one at a time
• put the shoes on a flat surface orientated like the pictures and glue the whole thing to the shoes, hold upright and press down lightly by the legs for 3-4 minutes then it should support itself. Let dry for 15 mins