Tiêu đề Hộp đựng vòi phun AnkerMake Tóm tắt Hộp đựng vòi p

Update 11/23/2023: added a 0.6 & 0.8 version

Updated 11/21/2023 v5: added thumb notches to make separation easier.

In need of yet another nozzle box, and tested with AnkerMake Nozzles. I made this one to hold slightly more (11) nozzles in each section than came in an order shipment. I have included the Autodesk Fusion 360 file, so you can edit the text, say to have 0.6 & 0.8 on the lid. My design was to keep as compact as possible, with separations between the sizes, and embossed labels. While no threads are included, the size of the holes is just needed to have a mild resistance to go in, or slight twisting. I made sure there was just enough room between individual nozzles to get fingers between them.

The lid has AnkerMake Nozzle 0.2 & 0.4 on the lid.

Magnets are used to keep it closed, 3mmX2mm. Pliers will be needed to press fit them in place, but they could be slightly loose on some…so a spec of glue is a good idea.