Tiêu đề MT-SYSTEM Inlay M Case Schaleneinsatz Tóm tắt MT-SYSTEM Inl

Useful shell to take care of screws, bolts, nuts and other smaller stuff.

This size M inlay (120x85mm) is useable with the MT-SYSTEM trays in size M/L.

HOW TO PRINT?

All MT-SYSTEM components are designed to be printed out in PLA or PETG on 02mm layer height. They are very stable but some parts like holders for heavy equipment (cordless screwdrivers) should be printed in PETG with a minimum infill of 40%.

WHAT IS IT ALL ABOUT?

We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. Here on F3D we offer a lot of stuff for free so have a look and pic YOUR individual endowment. You can also visit our webshop under www.makerteam.de to find all of these parts to buy in already printed and ready-to-use versions incl. mounting material. If you miss anything please let us know. We are always comitted to extend the system. Thanks.

MOUNTING THE MT-SYSTEM:

The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know.

Link1: https://makerteam.de/en/search?search=profile Link2: https://makerteam.de/en/search?search=Linsenschraube Link3: https://makerteam.de/en/search?search=slot+nut Link4: https://makerteam.de/en/search?search=magnet

SPECIAL ITEMS:

The MT-SYSTEM is much more than these few parts here at F3D. If you need special equipment like battery holders for FESTOOL, MAKITA and other unique stuff please visit our webshop: https://makerteam.de/3D-Druck/3D-Produkte/MT-SYSTEM/