Baby Bottle Holder (4 Pack)
Có thể giữ các chai trẻ em có chiều rộng 58mm/2,28 ". Được thiết kế để đặt trong một thùng chứa để vận chuyển để nó không vượt qua.
Mô tả
I was asked to make a friend a baby bottle holder that would keep them from tipping over during transport and that would fit in a small cooler. It could have been made simpler, but I was playing around with screw designs and thought it would be fun to put together.
The bolts and middle support should be printed with .25mm or less layer height, everything else can be printed up to .3mm. The middle column will require supports for the outer wall, do not place supports in the threaded area unless it can be removed easily. Infill can be set at 25%. Top and bottom will require supports for the bolt holes.
I printed mine in PLA, but you might want to go with the proper material that will be suitable for your situation.
Giấy phép
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!