Hex Monitor Stand Legs

Legs for monitor stand/small desk shelf with a hexagon pattern modeled in.

Has countersunk holes to secure legs to top with imperial (82 degree) flat head wood screws, for the top I used a 1" x 12" x 72" (cut down to 36") pine hobby board from home depot.

Recommend setting %infill or #walls for a soild part - each piece uses around 250g of filament.

Printed mine in pla but would recommend petg instead.

Check pictures for suggested platter arrangement on 235x235 (Ender 3) or 300x300 (Sovol SV06+) build plates