Perfboards LEGO-compatible mounts
Giá treo tương thích Lego cho 5 x 7 cm, 4 x 6 cm và 2 x 8 cm Perfboards
235
Lượt Xem
3
Lượt Thích
34
Lượt Tải
Cập Nhật Nov 22, 2025
Mô tả
There is some clearance under the board for wires to connect components. I think it's best to print it with PLA. Supports are not required. Good adhesion to the build plate is needed. Remember that you can always add some glue, but this is last resort.
Giấy phép
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!