Ciri trong cảnh quan dystopian bên cạnh chiếc Camaro

Image created in stable diffusion then used Hueforge to create the file.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 2.4
PLA Jessie Gray Blue Transmission Distance: 2.6
PLA Overture Light Gray Transmission Distance: 1.4
PLA Hatchbox Beige Transmission Distance: 3.5
PLA Overture White Transmission Distance: 6.4

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to cement
At layer #13 (1.12mm) swap to Gray Blue
At layer #15 (1.28mm) swap to Light Gray
At layer #17 (1.44mm) swap to Beige
At layer #21 (1.76mm) swap to White for the rest.