Giá đỡ cuộn chỉ họa tiết tổ ong v1 (đặt bàn, sử dụng ống trượt PTFE)

Print it lying on the honeycomb pattern without supports. Put PTFE-tubes into the holes for spools to turn easier. You can use less infill for the spool-zylinder, but use more infill for the foot to stand stable.

The holder is for standard spools with a maximum width of 8cm. Minimum hole diameter should be 50mm.

If you have issues inserting the PTFE-tubes in the holes (made with 0,2mm tolerance), consider playing around with a negative horizontal expansion in your slicer.