Nghệ thuật treo tường DIY | Chambre 006

=======================================================

PROJECT : DIY art: Chambre 006

FORMAT : STLs

You can find more models at: https://v-xl.art

--------------------------------------------------------

[ DESCRIPTION ]

The "Open Chambre" series is a collection of 3D-printable

sculptures released as free replication art by Tokyo-based artist V-XL (Baptiste Tavernier)

Size: 49 x 41 x 6 cm

Avg. print time: 80H.

Optimized for FDM 3D printing

--------------------------------------------------------

[ PRINT SETTINGS ]

> NOZZLE : 0.4mm (recommended)

> LAYER HEIGHT : 0.2mm

> INFILL : 15%

> MATERIAL : PLA or PETg

> STANDARD COLOR SCHEME: Black frame, White specimen, blue and red color accents (but it is of course up to you)

[ HARDWARE ]

Frame parts and other large parts need M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) to connect to each-other.

Smaller parts can be attached with glue.

--------------------------------------------------------

[ Print Manual ]

This artwork is divided into 24 files.

Print the 9 "Base" files (S.C.S.: black). They do not need supports, but a brim or helper-disks (I prefer helper-disks) can help stabilize the base onto the printer’s plate.

Fasten the Base with M3 x 8mm screws and M3 square nuts.

Print the "Base Inlays" (S.C.S.: red) for bases 1-3 and 7-9, and glue them into the corresponding base.

Print 14 “round light" (S.C.S.: blue and red), and glue them into the base 4 and base 6.

Print the "Central inlays" files (S.C.S.: blue), and glue them into the central frame.

Print 3 “square light" (S.C.S.: blue and red), and glue them into the central frame.

Print 3 “diamond" (S.C.S.: blue or red), and glue it into the central frame.

Print "Statue" 6 times (S.C.S.: black), and glue them into bases 1-3 and 7-9. You shouldn't need supports, unless you have a very old printer. It is supposed to be printed standing, not flat on the bed.

Print "SPECIMEN“ (S.C.S.: white). You can attached it to the frame with one M3 x 8mm screw and one M3 nut.

--------------------------------------------------------

[ SHARE YOUR MAKE ]

Please share your build! I’d love to see your favorite

color combinations.

========================================================

© 2025 V-XL