Resident Evil - Móc khóa Umbrella Corporation

Dimensions: 35x35x3 mm

Print time is more or less around 24m at 0.16 layer heigh (0.4 mm nozzle).
Print time is more or less around 32m at 0.12 layer heigh (0.4 mm nozzle).

Print parameters:

• Layer height - 0.16 mm or 0.12 mm
• Perimeters - 3
• Infill - 10%
• Brim - NO 
• Support - NO
• Raft - NO
• Filament type - PLA or any

Could be printed in multicolor without MMU, AMS or similar.

For multicolor print start with BLACK:

When printing at 0.16 layer height: 

• put the printer in Color Change mode(G-code M600) at layer 16 and then change filament with WHITE;
• put the printer in Color Change mode(G-code M600) at layer 17 and then change filament with RED

When printing at 0.12 layer height: 

• put the printer in Color Change mode(G-code M600) at layer 20 and then change filament with WHITE;
• put the printer in Color Change mode(G-code M600) at layer 22 and then change filament with RED