MagFeeder - Bộ cấp filament nam châm cho Prusa Enclosure [Xếp chồng]

Usage:

Used to feed the filament from outside of the enclosure. From a spool holder, drybox, or whatever you could source your filament from.

It's installed in place of the optional handle, at the side of the enclosure. 
Allowing to Stack multiple enclosures ontop of each other.

Features an Unique magnetic attachment, which allows to easily interact with the filament, without the need of opening the enclosure.

Fits the regular 4mm x 2.5mm PTFE tube.

Hardware required:

2x Magnets

• OD 10mm
• ID 3mm (or bigger)
• Thickness 3mm (recommended 3mm, but small variations are allowed)

2x Brass Inserts

• M5x9.5

2x Festo QSM-M5 

7x m3x12 hex-bolts

3x m3 square nuts

note: a soldering iron is required in order to hot-press the brass inserts

How to install:

Print one of each piece:

• MagFeeder_Body.stl
• MagFeeder_Cap.stl
• MagFeeder_TubeEnd_A.stl
• MagFeeder_TubeEnd_B.stl

Using your soldering iron, hotpress the two M5x9.5 brass inserts.

Pay attention to the magnets polarity, as they usually come with two variants (regarding the bevel side)

Assembly STEP file is also available

I provide to you the full assembly in .STP, for all your CAD needs.