Adapter Filament Sunlu cho Python AMS

The Python AMS has a spool holder and spacers which work great for all standard filament spools. The Sunlu filament has an inner spool diameter of roughly 73mm which is way too big to be secured to the stock spool holders and will allow the spool to slip off center over time. 

I have made an adapter for the stock Python AMS spool holder which screws onto the threaded rod and continues the use of the spool-holder-top and spool-holder-bottom. 

For heated Python AMS enclosure:

•  Print in PETG or a filament with greater heat tolerance

For non-heated Python AMS:

• Printing in PLA is fine

Printing Parameters:

• Layer height - 0.2mm (works fine for this)
• Walls - 3
• Infill - 10%
• No supports, brim, raft, or skirt required