Giá đỡ hextrudort và goliath cho máy in merc.1

I took the LGX mini mount, and modified it to fit the hextrudort. I then made a new mount for the goliath. Other files that were modified were the shield, bottom and back parts.

All the stl's are there. I've included an "x endstop", that should be replaced otherwise the 'back' will hit the stock x endstop peice on the x extrusion.

I've also included a Z rod mount replacement. This will allow you to move it down, and allow you to move the rods down as well. You will need to do this, if you do not the goliath will hit the mount/rod. You will lose roughly 16mm of Z travel.

It's being used right now with no issues at all for the last 2 weeks!

• disclaimer: I'm not a pro at all of this. I'm not new either. Learning as I go, and decided I should share if anyone else was interested. Most of these files were just modified to my liking from Eva 2.4 files. I do not claim these as my own.