HDRY System - Hộp chứa Silica Gel - BẢN NÂNG CẤP (V2)

Ventilated Silica Gel Box for HDRY System
Check the HDRY System here: https://www.cc3dprojects.com/cc3d-hdry-system

This is a ventilated silica gel box designed to improve moisture absorption inside your HDRY setup.

Learn more:

The video centers on the testing and development of V1. However, we have also created and published V2. 

Important Update: Since publication of the video, we have seen incredible success (10% humidity) using V1 + molecular sieves instead of desiccant. Feel free to test whichever version and combination you would like. 

As for V2, the system is made of two main parts:

• A silica gel basket with a closing lid

• A support frame with a slot for a fan

The fan forces air through the silica gel, increasing efficiency and helping the desiccant absorb humidity much faster compared to passive systems.

---

Drying & Reuse

If you print the parts in ASA or other heat-resistant materials, you can easily:

• Remove the silica basket

• Place it directly in the oven to dry the silica gel

• Put it back into the system after regeneration

This makes the system reusable and very convenient for long-term use.

---

Available Versions

You will find two different formats:

350g Silica Boxes (x2)

• Designed for spool warehouse configuration

• Compatible with external Polydryer setup

215g Silica Boxes (x2)

• Designed for AMS or Roller setups

• Compatible with external Polydryer setup

---

Suggested Configurations

For a 2-module HDRY setup:

• Place the Polydryer in the lower module

• Install 2 silica boxes in the upper module instead of the second Polydryer

For a single module setup:

• You can use 2× 215g silica boxes without any Polydryer

---

Required Materials

• Fans
  https://s.click.aliexpress.com/e/_c2ygeAX3
  https://s.click.aliexpress.com/e/_c4pdEkAt

• Desiccant (Silica Gel)
  https://amzn.to/4szvJZY
  https://s.click.aliexpress.com/e/_c4NGDLM1

• Magnets: https://s.click.aliexpress.com/e/_c2uDT9jX

• M4 Screws
  https://s.click.aliexpress.com/e/_c40fFNDj

• DC Barrel Jack
  https://s.click.aliexpress.com/e/_c4pdEkAt

• Power Supply
  https://amzn.to/41mypyl
  https://s.click.aliexpress.com/e/_c3pbSO1r

Slicer settings:

3 Walls 3 Bottoms 3 Tops
Infill 10% Gyroid

Do not use support on the box part - other support organic or Tree