Đầu chụp Paracord cho khóa kéo và nhiều mục đích khác - 2× ø2mm hoặc 1× ø4mm

Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent.

Also works for a single ø4mm end.

• no knots
• no tools
• no extra parts
• no support geometry

This print is tested with and developed for 0.25mm nozzles.

Changelog

Paracord End Cap 

2022-06-08

v0.4

initial public release

BOM

1. housing
2. retainer

Assembly

Prepare the paracord ends with melting to keep them from fraying, and to ease threading through the end cap eyes. Keep the melted part as small as possible!

Threading the loop end through the holes makes assembly easier. Using an iron wire also helps.

Production

Use a 0.25mm nozzle, the parts are tiny! Print quality will be better if you print several pairs - layer cooling time is too short if you only print one. 
Tested with ABS and PETG.

Alternatives

Dangletag, customizeable tiny name tag for two ø2mm paracord ends

quick Paracord rope clamp 4mm & thimble

Paracord thimble and rope clamp

Development

Please comment if something can be improved, or if it works for you. Also, don't forget to share makes and application examples!