Hộp đựng máy hàn điểm Docreate 30Gear

The case is based on my parametric “Rugged Box” and is resized to fit the Docreate Gear30 Spot Welder.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Assembly

You will need six M3x30 screws to assemble it (s. below). 

If you want to fixate the spot welder when closed, use a fitting piece of foam with a thickness of ~10mm for the lid.

Screws

I like these screws which have a nice round head:
Allen hex socket button head screw

Or, if you want no screw head at all, which I personally like even more:
Hex socket set screws

Note: I recommend the stainless steel ones. The blackened ones are oily and have to be cleaned.