ASMEB18.2.1.1 1/8" | 2mm-130mm | Hex Bolt STL Pack | 3D Print Optimized

## ASMEB18.2.1.1 1/8" — Hex Bolt STL Pack | 3D Print Optimized

Complete collection of ASMEB18.2.1.1 1/8" hex bolts, fully optimized for FDM 3D printing.

### What's included

- 65 STL files — lengths from 2mm-130mm (0.08inch-5.12inch)

- Standard ASMEB18.2.1.1 geometry with FDM tolerances

- Matching hex nut included

### Print settings

- Layer height: 0.2mm

- Infill: 40% (gyroid recommended)

- Perimeters: 3 minimum

- Orientation: vertical (no supports needed)

- Material: PLA, PETG, ABS, ASA — all compatible

### Optimized for 3D printing

All models have been specifically adjusted with FDM tolerances so threads fit properly when printed. No post-processing required in most cases — print and use.

### Need all lengths?

This is a preview with a selected length. The complete pack with all 65 lengths (2mm-130mm) is available on Cults3D.

---

Generated with parametric automation from standard ASMEB18.2.1.1 specifications.