Nắp hộp khăn giấy trang trí - họa tiết Diamond Plate

Decorative Tissue Box Cover - Diamond Plate pattern

Parametric Autodesk® Fusion 360® file included!

Decorative Tissue Box Cover, diamond plate pattern.

Designed to fit over Kleenex® Professional comfort touch™ tissue* boxes. 

Fits tissue boxes that are 226mm x 122mm x 50mm

* I earn a tiny commission from the affiliate link provided, there is no extra cost for you. 

Buy me a coffee ☕

https://buymeacoffee.com/papamaker

Printing Recommendations

• Always dry your filament before printing, for best performance.

• I have had excellent success using Bambu Lab Textured PEI plate.

• Always wash your plate with quality dish soap, removing residue with 99% Isopropyl Alchol (IPA).

• Bambu Lab filament filament is recommended.

Notes

Due to print speeds changing on certain layers and the filament choice, horizontal artifacts may show up. These artifacts are visible in photos attached, I used Silver Bambu Lab Silk+.

Disclaimer & Liability Waiver

This 3D model and any associated files are provided “as is”, for personal use only, without warranty of any kind, express or implied. The designer makes no guarantees regarding fit, strength, durability, or suitability for any specific tools or use case.

3D printed parts may vary significantly based on printer calibration, filament type, print orientation, slicer settings, and post-processing. Improper printing, assembly, or use may result in damage to tools, property, or personal injury.

By downloading, printing, or using this design, you acknowledge and agree that the designer shall not be held liable for any direct, indirect, incidental, or consequential damages arising from the use or misuse of this model.

Use at your own risk.