Biển hiệu "Không, hôm nay không" với hình AT-AT

The 3mf file is set up as a color print. The words are created within PrusaSlicer and are incorporated into the 3mf file. You can print the words or not if you just want the picture of the fallen AT-AT. If you don't print the words you probably don't need the ironing feature enabled and you will need to delete the color change to black at the end.

Print at 100% infill with a layer height of 0.08mm. Usually the base layer is 0.16mm, but I have a height range modifier set up at the bottom (and top) to help speed up the printing, so the first layer height is 0.2mm in the 3mf file.

Filaments Used:
PLA Overture Black Transmission Distance: 1
PLA Overture Cement Gray Transmission Distance: 4
PLA Jessie Gun Metal Grey Transmission Distance: 1.5
PLA Overture Light Gray Transmission Distance: 3.5
PLA Jessie White Transmission Distance: 4.5

Swap Instructions:
Start with Black
At 0.48mm swap to Cement Gray
At 0.88mm swap to Gun Metal Grey
At 1.04mm swap to Light Gray
At 1.52mm swap to White for the rest

Additionally, if printing the words, at 2.20 mm swap back to black.