Ốc cao hơn 2 cm cho Zeldrix Screwdriver Spool Rewinder

Print settings same as original:

• Printer: Creality K1 Max

• Filament : Creality PLA

• Layer height : 0.2mm

• Infill density : 15%

• Infill pattern : Gyroid

• Supports : No

• Time to print : 3h (with 90mm/s speed)

Screw need 58 gr with 15% infill and 4 wall loops.

Hex key need 2 gr with 100% infill.

You can use .3mf with the model cut into 3 pieces (see objects tab) if you need even more height. However, the screw will then no longer be compatible with 59 mm spool width.