Nắp Xả Voron 2.4

Update 26/11/2024 : 5 new models. Add ECAS + left side bowden input
Update 06/10/2024 :  Add plain cover
Update 08/28/2023 : Stiffer cover and fix issue below for panel < 3mm

Yes, this is another backpanel cover for Voron 2.4 ! I designed it to use with my umbilical top mount and bowden side entry.
 

How to print it ?

• exhaust_cover_spacer.stl must be scale in Z in your slicer to the backpanel thickness
• if you want left side output print  exhaust_cover_right_bowden_output.stl as mirror
   

Install it.

4 printed parts are needed (I know there is only 3 in this repo), the fourth is the original grid from Voron 2.4R2 (https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Exhaust_Filter/exhaust_filter_grill.stl).

VHB, foam or nothing : Use whatever you want to fix it

Bill of materials

Original Exhaust filter hardware should be enough. Below fine extra harware

Hardware

Qty

Notes

M3x8 BHCS

1

Known issue

(Fixed by exhaust_cover_right_bowden_output_v2)

The original Voron grid can be a bit thicker with thinner panel : Two options, cut your grid with a blade or reprint cutting at desired height in your slicer

Related model : Umbilical back cable holders