Hộp Đựng Đồ Ống Dưới Xe Đạp Kiểu Mở Xoay

Last model the down tube storage for Venge I modeled is difficult to access inside the box.

Swing open is easy to use.

This model can hold ABUS Bordo Lite 6055.

UPR works with 2 walls ,but used height modifier 4walls around hole for strength.

Also LWR, height modifier 4walls around hole.

Shaft should be rigid, so I print with 5walls. 

Print with PETG about 100g 4 hours UPR and LWR, Voron 2.4/P1S.

Apply soft tapes on UPR to avoid scratch on bike tube.

https://www.amazon.co.jp/dp/B0CMGBR36Z

x M5 bolt

1x M5 lock nut (or Loctite)

1x washer

W25mm free cut velcro Straps,Hook and Loop same side

• Insert shaft

• Rotate it CW

• Push in and CCW to lock