Pha Chế Đầu Hút Máy Kho – Xoay Ống Tiện Lợi

I included a couple photos of variants I rendered showing that the updated model can handle a wider variety of shapes. The rotation_angle can go up to roughly 120deg before it overlaps the drill hole, and works in both positive and negative angles. The hose_angle can go from 1 to 120deg and needs to be a positive number.

I expect that some variants will require support, but I successfully printed at 45deg rotation with 75deg hose without support in the same orientation as the original model. 

Also as a note, if you want a simple way to increase the spacing between the drill hole and the hose adapter body, the fillet_size parameter is the fastest way to achieve that without going deeper into the model

STL file attached is set for 35mm hose diameter