{"slice":{"locale":"en","from":20000,"to":40000,"total_chars":52880,"html":"<p><strong>BASE - 2 VERSIONS...</strong></p><p><strong>One of the following Bases is required.</strong></p><p><strong>5a</strong> - <strong>Standard Base</strong> - remix of @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>) Base where the center crossbar has been lowered to accommodate larger diameter filament spools. Note that the Base Covers from Mark&#39;s design are not supported with this Base. I recommend placing two zipper pouches filled with desiccant beads on the bottom of the container to manage humidity in the container (one zipper pouch option is listed in the links above).</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/1cebdc91-f47e-44a3-8bf0-f017f2c63127/rewinder-ultimate-drybox-base-render.jpg#%7B%22uuid%22%3A%2225f2198e-7cac-4ca2-b68c-25ba2fa8cec3%22%2C%22w%22%3A2163%2C%22h%22%3A1623%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>5b</strong> - <strong>Split Base</strong> - consists of two (identical and interchangeable) Base parts - remix of @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>) Base where the center crossbar has been lowered to accommodate larger diameter filament spools, and the Base has been split into two parts that slide together - to allow <strong>printing on small bed (180mm by 180mm) printers such as the Prusa MINI or Bambu Lab A1 mini</strong>. Note that the Base Covers from Mark&#39;s design are not supported with this Base. I recommend placing two zipper pouches filled with desiccant beads on the bottom of the container to manage humidity in the container (one zipper pouch option is listed in the links above).</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/250a1048-ceb9-4f36-9b16-512833cdafb2/split-base-render-3.jpg#%7B%22uuid%22%3A%2241bc815b-f967-464a-bb63-adf714044730%22%2C%22w%22%3A2360%2C%22h%22%3A1770%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>OPTIONAL 3D PRINTED PARTS:</strong></p><p>---------------------------------------------</p><p><strong>1</strong> - <strong>Hygrometer Holder</strong> - redesigned version of @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>) hygrometer holder that attaches to the Base to ensure that the hygrometer display is always perfectly level (horizontal) without having to fiddle with the position of the Coupler Nut inside the Drybox - as was required in the original design!</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/a0e98f2b-8aed-4ef1-b236-9e5c6461db8e/hygrometer-holder-photo-5.jpg#%7B%22uuid%22%3A%22a22a1b43-e35a-40db-bd7f-b5446ac25081%22%2C%22w%22%3A2667%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/204fc0b5-a6d0-4679-9667-3eecfabeb31b/hygrometer-holder-render.jpg#%7B%22uuid%22%3A%228805c111-5ba1-4904-9e8c-e593dfe724c7%22%2C%22w%22%3A2354%2C%22h%22%3A1766%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>2</strong> - <strong>Tag Holder</strong> - redesigned version of @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>) tag holder that remains on the drybox at all times - the filament tag only needs to be swapped out when a different brand or color of filament is loaded into the drybox. In the original design, the Tag Holder snapped onto the Coupler Cap - requiring you to keep track of which Coupler Cap and which filament tag belonged on each drybox every time you unloaded filament from your printer.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/00aa47d3-1cc0-4053-9995-5233030f07e6/tag-holder-ultimate-drybox-photo-2.jpg#%7B%22uuid%22%3A%229913e41a-706d-4405-adca-0e35213f4840%22%2C%22w%22%3A2666%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>3</strong> - <strong>Coupler Nut</strong> - redesigned version of @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>) coupler nut that now includes PC4-M10 Threads and a Flange for a perfect, secure fit with the PC4-M10 PTFE tube coupler. I used the PC4-M10 Threads from @jurassic73&#39;s (https://www.printables.com/@jurassic73) PC4M10 - Tapered threaded opening STEP/STL for design (<a href=\"/3d-model/205505-pc4m10-lo-ren-con-tapered-step-stl-de-thiet-ke\">https://www.printables.com/model/889353-pc4m10-tapered-threaded-opening-stepstl-for-design</a>) to get the correct pitch and taper for the PC4-M10 coupler threads - increasing the X and Y dimensions of the thread by 2% each to allow hand-tightening of the Coupler Nut to the PC4-M10 coupler.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/9dcb0aa2-525f-4332-8e1c-d0692f3e8928/coupler-nut-with-tag-holder-photo-1.jpg#%7B%22uuid%22%3A%2237988048-2b04-48e5-9bbf-34192f2a5730%22%2C%22w%22%3A2667%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/fb2acf19-9041-4699-80f6-bd80f7b9fe52/coupler-assembly-render-1.jpg#%7B%22uuid%22%3A%224929968b-51b6-4309-8f6b-b5dc25d18f46%22%2C%22w%22%3A2361%2C%22h%22%3A1771%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>4</strong> - <strong>Filament-Holding Drybox Cap (aka Coupler Cap Gen 3)</strong> - completely redesigned replacement of @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>) coupler cap that improves the grip on the loose end of the filament and eliminates the bending of the end of the filament as seen with Mark&#39;s original design. Consists of two parts: a Base and a Knob printed with Bambu Lab &#34;TPU for AMS&#34; (or a Base printed with TPU 95A Base and a Knob printed with PLA or PETG Knob) that you twist to grasp the filament with a built-in clutch before pressing onto the PC4-M10 coupler to seal the drybox opening where the filament is fed into your printer.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/9460dba3-ad4c-4dc7-a46f-3e627de25b7a/coupler-cap-gen-3-photo-5.jpg#%7B%22uuid%22%3A%222859896b-8252-4606-bf58-9699ae7d22a7%22%2C%22w%22%3A2667%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/9289f6c7-a73b-497f-a964-85976dad8b6e/coupler-cap-gen-3-usage.jpg#%7B%22uuid%22%3A%22fb52043f-48b1-4248-a05b-4ad8a1f9010c%22%2C%22w%22%3A2392%2C%22h%22%3A1794%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>TPU DRUM SLEEVE - 3 VERSIONS...</strong></p><p>Note that a <strong>TPU Drum Sleeve helps increase the grip of the filament spool on the Auto-Rewinder Drum</strong>. It <strong>isn&#39;t needed for many filament spools</strong>, but can help improve rewinding for nearly empty spools or spools that have a very slippery center hole.</p><p>Also note that <strong>spools with a cardboard center hole typically don&#39;t need a TPU Drum Sleeve</strong> due to their already high grip on the Drum!</p><p><strong>6a</strong> - <strong>51 Plus TPU Drum Sleeve</strong> - may be used to provide more grip on plastic filament spools. This &#34;rewinderUltimateDryboxDrumSleeve51plusTPU-7c&#34; version is a general purpose sleeve that <strong>remains on the Drum at all times</strong>. It allows some movement of the spool from side to side - which is ok, since the Saddle keeps the spool from shifting too far to either side. It works with almost any filament spool with a center hole diameter of 51mm (~2.01&#34;) or more and a maximum spool thickness of 68mm (~2.68&#34;). A spool with this sleeve should be able to wind the Spring on the Drum but still allow slippage when the Spring has been wound more than 5 to 9 full turns. Please refer to the following photos for proper usage of this sleeve.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/c1dc0461-0a00-4437-bc80-677cb7e81d99/rewinder-ultimate-drybox-drum-assembly-with-sleeve-2.jpg#%7B%22uuid%22%3A%2281247599-df04-44ca-b40c-65094f477ba4%22%2C%22w%22%3A2666%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/4b89ef2e-24de-4b74-8bae-9b95dfaa09c1/rewinder-ultimate-drybox-drum-assembly-with-sleeve-3.jpg#%7B%22uuid%22%3A%22ffcf8ea5-d714-4d6f-8060-86a51770c55c%22%2C%22w%22%3A2666%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/bb27ccce-8fff-4a05-8561-7946e1567d03/rewinder-ultimate-drybox-drum-assembly-with-sleeve-5.jpg#%7B%22uuid%22%3A%22066b10a2-9211-4b7a-8714-c35abd84abd5%22%2C%22w%22%3A2666%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>6b</strong> - <strong>58 to 66 TPU Drum Sleeve</strong> - may be used to provide more grip on plastic filament spools. A spool with this &#34;rewinderUltimateDryboxDrumSleeve58to66TPU-7c&#34; version will be able to wind the Spring on the Drum but still allow slippage when the Spring has been wound more than 5 to 9 full turns. Ribs on the inside of this sleeve act like a clutch to hold onto the Drum but also slip as the Spring tension increases. This version is designed for spools (such as Sunlu and FilaCube) with a center hole diameter between 58mm (~2.28&#34;) and 66mm (~2.60&#34;) and a maximum spool thickness of 65mm (~2.56&#34;). This sleeve is pushed into a filament spool&#39;s center hole before being snapped onto the Drum. Please refer to the following photos for proper usage of this sleeve.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/a13b754d-de6b-41cc-9854-8a4a384c6635/rewinder-ultimate-drybox-sleeve-in-spool-1.jpg#%7B%22uuid%22%3A%225dbde566-79ad-47cf-bf9b-2e887383455b%22%2C%22w%22%3A2666%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/b824f652-c5ab-4b31-9644-029b2fb7c563/rewinder-ultimate-drybox-sleeve-in-spool-2.jpg#%7B%22uuid%22%3A%22fbe49a30-af9e-4f76-8c8f-293f21f9e0cb%22%2C%22w%22%3A2667%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/784a12a2-8525-46bf-b0d8-f9f009f7c334/rewinder-ultimate-drybox-sleeve-in-spool-3.jpg#%7B%22uuid%22%3A%2299cb75cb-068e-4ba0-bc4e-277fcf04e668%22%2C%22w%22%3A2667%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>6c</strong> - <strong>Standalone (54 Plus) TPU Drum Sleeve</strong> - may be used to provide more grip on plastic filament spools. This &#34;rewinderStandAloneDrumSleeveTPU-1c&#34; version is an alternative general purpose sleeve that <strong>remains on the Drum at all times</strong>. It has a lip on each edge of the sleeve to limit side-to-side movement of the spool to within the sleeve. Note that <strong>this sleeve does NOT support Prusament filament spools!</strong> It works with any filament spool with a center hole diameter of 54mm (~2.13&#34;) or more and a maximum spool thickness of 64mm (~2.52&#34;). A spool with this sleeve should be able to wind the Spring on the Drum but still allow slippage when the Spring has been wound more than 5 to 9 full turns. Please refer to the above photos for the &#34;51 Plus TPU Drum Sleeve&#34; for proper usage of this sleeve.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/7cdfb3f4-df8b-42b2-a6a1-5385792e23b2/rewinder-stand-alone-drum-sleeve-render-2.jpg#%7B%22uuid%22%3A%2266f34dfd-dfe0-466c-aa0d-9e7cdca9124e%22%2C%22w%22%3A1678%2C%22h%22%3A1258%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>OPTIONAL 3D PRINTED PARTS THAT ARE NOT INCLUDED WITH THIS PROJECT:</strong></p><p>---------------------------------------------</p><p><strong>1</strong> - <strong>Filament Identification Tags</strong> from @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>) that slip into the Tag Holder to identify what filament is in each drybox.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/154a51e8-c046-40f7-b618-50762048fa0e/filament-tags-photo-1.jpg#%7B%22uuid%22%3A%22d385d34d-a28b-40a3-a465-d8b26c8df31a%22%2C%22w%22%3A2667%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>2</strong> - <strong>Lid Seal</strong> from @GunplaMark&#39;s (https://www.printables.com/@GunplaMark) The Ultimate Cereal Container Filament Drybox (<a href=\"/3d-model/161251-hop-dung-filament-kho-bang-hop-ngu-coc-toi-uu-phien-ban-2025\">https://www.printables.com/model/1249376-the-ultimate-cereal-container-filament-drybox</a>). I prefer to use Mark&#39;s Lid Seal, since I sometimes use a Polymaker PolyDryer with Mark&#39;s Adaptor to dry my filament in my dryboxes, but you can alternatively (carefully) snip off the tab that protrudes from the existing cereal container closure seal.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/ddd63b3e-8134-47bf-abfe-048b3750a82a/marks-lid-seal-and-original-seal-photo-1.jpg#%7B%22uuid%22%3A%221108c2b1-d1c8-4c00-8a2e-49eb4944c824%22%2C%22w%22%3A2666%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>OPTIONAL 3D PRINTED TOOLS:</strong></p><p>---------------------------------------------</p><p><strong>1</strong> - <strong>Coupler Hole Jig</strong> - a tool that I recommend printing and using is my Ultimate Filament Drybox Coupler Hole Jig (https://www.printables.com/model/1292539-ultimate-filament-drybox-coupler-hole-jig) remix; this tool makes it much easier to position the coupler hole in the drybox than the original version. Note that this tool is used when building your drybox!</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/a1048acd-cb1d-4fd0-81b6-a1104c7f6f9b/ultimate-drybox-hole-jig-photo-3.jpg#%7B%22uuid%22%3A%2245b3d45c-05d5-40db-b160-3827ec84cfe4%22%2C%22w%22%3A2666%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p>.</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/117a5d68-a9bd-4f2c-93b2-e9ebcf57f4d9/ultimate-drybox-hole-jig-usage-1.jpg#%7B%22uuid%22%3A%222d2272ed-ce3e-4821-97c5-c525926b9e92%22%2C%22w%22%3A2667%2C%22h%22%3A2000%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>2</strong> - <strong>Coupler Nut (Inside) Wrench</strong> - a tool that I recommend printing and using is my Coupler Nut (inside) Wrench from my Improved Coupler Nut and Wrenches for Ultimate Filament Drybox (<a href=\"/3d-model/205506-coupler-nut-cai-tien-bo-co-le-cho-ultimate-filament-drybox\">https://www.printables.com/model/1566890-improved-coupler-nut-and-wrenches-for-ultimate-fil</a>); this tool makes it easy to install (or remove) my redesigned Coupler Nut that is inside the drybox. Note that this tool is used when building your drybox!</p><p><img src=\"https://media.printables.com/media/prints/1695800/rich_content/a987ae45-05e7-4e9c-a2f3-d903f6d81bfd/coupler-nut-wrench-render.jpg#%7B%22uuid%22%3A%22cdc5db03-493b-4f4a-bf82-5e4ca6d56097%22%2C%22w%22%3A2007%2C%22h%22%3A1505%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p><p><strong>3</strong> - <strong>Coupler (Outside) Wrench</strong> - a tool that I recommend printing and using is my Coupler (Outside) Wrench from my Improved Coupler Nut and Wrenches for Ultimate Filament Drybox (<a href=\"/3d-model/205506-coupler-nut-cai-tien-bo-co-le-cho-ultimate-filament-drybox\">https://www.printables.com/model/1566890-improved-coupler-nut-and-wrenches-for-ultimate-fil</a>); this tool makes it easy to install (or remove) the PC4-M10 coupler that is outside the drybox. Note that this tool is used when building your drybox!</p>","has_more":true},"deferred":false}
