{"slice":{"locale":"en","from":20000,"to":22419,"total_chars":22419,"html":"<p>el.</p>\n<p><img src=\"https://media.prusaprinters.org/media/prints/76318/rich_content/4385382b-c693-46d2-90a2-4338b8535256/spoolstorage_anglebracket_r_ms.jpg#%7B%22uuid%22%3A%22c9da534f-97fb-499c-b438-b37d8f3f611b%22%2C%22w%22%3A1011%2C%22h%22%3A546%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p>\n<p><strong>[red]</strong> Inside the spool storage you have to install the angle bracket. This supports the side panel.</p>\n<p><strong>4.6]  Side acrylic glass panel:</strong></p>\n<p><img src=\"https://media.prusaprinters.org/media/prints/76318/rich_content/58592daa-6f4d-4bf3-ad9e-2d1047cb5d7a/spoolstorage_sideglasspandel_r_ms.jpg#%7B%22uuid%22%3A%22b0abaf73-6c12-4c3b-a9c7-802dd39880a6%22%2C%22w%22%3A757%2C%22h%22%3A680%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p>\n<p>Install and glue in the corner parts.</p>\n<p>Do not forget to insert the magnet with the right polarity. (the holes for the magnets have to be at the backside of the panel)</p>\n<p><strong>[red]</strong> The thinner wall of the parts has to face to the red arrows.</p>\n<p>The door handles can be installed like in <strong>2.8]</strong></p>\n<p><strong>4.7]  Installing the front doors:</strong></p>\n<p>Follow the instruction of <strong>2.8]</strong>.</p>\n<p><strong>4.8]  Installing the doorstoppers:</strong></p>\n<p>Follow the instruction of <strong>2.10]</strong>.</p>\n<p><strong>4.9]  Installing the wooden side panels:</strong></p>\n<p><img src=\"https://media.prusaprinters.org/media/prints/76318/rich_content/113dd089-92ac-4367-910f-a3f25df5fbc2/spoolstorage_sidepanelmain_r_ms.jpg#%7B%22uuid%22%3A%2251569cac-6e45-4495-9d9f-bad8ef69de29%22%2C%22w%22%3A725%2C%22h%22%3A635%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p>\n<p><strong>[red]</strong> Insert the wooden panel and fix it with 4 screw in place.</p>\n<ul>\n<li>\n<p><strong>Repeat this process for the second panel.</strong> </p>\n</li>\n<li>\n<p><strong>Before you install these panel I recommend to cut out all holes for the cables.</strong></p>\n</li>\n</ul>\n<h4>5]  Wooden panel install - bottom desk:</h4>\n<p><img src=\"https://media.prusaprinters.org/media/prints/76318/rich_content/a5683a2d-ee1a-486c-8ef9-73d74b38b9a6/bottomwoodenpanel_r_ms.jpg#%7B%22uuid%22%3A%22a1c3f97f-0113-41bf-9095-71e187fb0444%22%2C%22w%22%3A639%2C%22h%22%3A798%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p>\n<p><strong>[red]</strong> Install the wood panel with the four brackets.</p>\n<p><img src=\"https://media.prusaprinters.org/media/prints/76318/rich_content/806acdf4-019e-4ba8-8a00-f9608a82f59a/01_overview.jpg#%7B%22uuid%22%3A%227729fc15-97a7-40a2-9aa5-0b1327ec8748%22%2C%22w%22%3A294%2C%22h%22%3A481%7D\" alt=\"\" loading=\"lazy\" decoding=\"async\" referrerpolicy=\"no-referrer\"></p>\n<p><strong>Now your enclosure should be finished!</strong></p>\n<p><strong>I hope you have fun with the building process!</strong></p>\n<p><strong>If there are any questions left or something is missing, feel free to ask me!</strong></p>\n<p><strong>MODS:</strong></p>\n<p><em><strong>Longer Legs:</strong></em></p>\n<p><em><a href=\"https://www.printables.com/model/831699-longer-legs-for-rettex31s-lack-enclosure\" rel=\"nofollow ugc noopener\" target=\"_blank\">https://www.printables.com/model/831699-longer-legs-for-rettex31s-lack-enclosure</a></em></p>","has_more":false},"deferred":false}