{"slice":{"locale":"en","from":20000,"to":22265,"total_chars":22265,"html":"<p>on the top surface of the keycap top. Then extrude it 0.2mm from the surface and you’re done. Most CAD programs have a text tool allowing you to easily add all kinds of symbols, numbers and letters that may be required.<br>\n<br>\nAfter drawing the sketch on your keycap, you can extrude the sketch 0.2mm out of the top surface.<br>\n<br>\n <br>\n4.  <strong>ATTACHING THE LETTER TOPS</strong></p>\n<p>1.  The letter tops can be attached to the keycap base by using glue. For example <strong>Loctite Super Glue.</strong> </p>\n<p><strong>CAUTION:</strong> This glue cures extremely fast as soon as you apply any force, therefore be extra careful to align the tops with the cap before applying pressure. Use a more slow-curing glue if you prefer more control during this step.<br>\n<br>\n <br>\n2.  For best glue grip, scuff up the surface of the keycaps. This can easily be done with all the keycap bases installed by just scratching the entire keyboard on a sheet of sandpaper.<br>\n<br>\n <br>\n3.  Apply a small puddle of glue to each keycap base, before carefully aligning the keycap tops with the keycap followed by pushing down until the glue has set.<br>\n<br>\n<br>\n <br>\n4.  When they’re all glued in place it should look something similar to this.<br>\n<br>\n <br>\n5.  To finish up the look, we can add a decorative frame around the outer edge of the keyboard. Here we have two options, a 3D printed version, and a laser cut wood version. </p>\n<p>3D printed version.<br>\n</p>\n<p>Laser cut wood version.<br>\n</p>\n<p>This can simply be glued into place by applying a thin line of glue around the edge of the frame.<br>\n</p>\n<p>Carefully align the frame with the main body before pushing down for the glue to set.<br>\n<br>\n <br>\n6.  Finally, add some foam or fabric feet to the underside of the keyboard to prevent the screws from scratching the desk surface.<br>\n<br>\n </p>\n<p><strong>KEYBOARD COMPLETE!</strong></p>","has_more":false},"deferred":false}
