{"slice":{"locale":"en","from":20000,"to":21586,"total_chars":21586,"html":"<p>_________________________________________________________________________ </p>\n<p>Changes and upgrades I've done to the original Design: </p>\n<ul>\n<li>Added antenna base protection</li>\n<li>Added Notification Buzzer</li>\n<li>Added Notification vibrator</li>\n<li>Added Notification LED</li>\n<li>Added Navigation Switch for canned messages</li>\n<li>Added  GNNS/ GPS Module  ( Beidou+ GPS) </li>\n<li>Added environmental Sensor BME 280/ 680 (temperature, humidity, air pressure,(AIQ))</li>\n<li>Added Magnetic pogo pin connector for 15 watt quickcharging</li>\n<li>Added tethered TPU  foot ( protects the magnetic pogopin connector+ USB C port)</li>\n<li>Added TPU sealing for back cover ( more for looks then actual watertight ;) )</li>\n<li>Replaced tiny wifi/Bluetooth coil antenna with external PCB antenna with great range!</li>\n<li>Mounting point for Metal belt clip</li>\n<li>GPS Power  on/off switch by meshtastic software and mosfet</li>\n<li>Acrylic 1mm display protection</li>\n<li>Lifted user button for better feedback</li>\n<li>Transparent filament fiber optics system status lights</li>\n<li>Cleared out back cover so 18650 cells connected with metal band ( spot welded) can fit</li>\n<li>Wifi/ Bluetooth antenna cable routing channels  in front face plate</li>\n<li>Mounting point and cable routing for vibra motor in front face plate</li>\n<li>Deleting original coil antenna cutout</li>\n<li>Added SMA hex nut key (with the antenna base protection in place its otherwise hard to tighten the nut properly)</li>\n<li>15 Watts Desk charger (15 Watts external quick charging compared to 3.5 Watts from heltec V3 onboard charging circuit)</li>\n</ul>","has_more":false},"deferred":false}