{"slice":{"locale":"en","from":20000,"to":22601,"total_chars":22601,"html":"<p>ss the connector through the opening in the back. Be careful to get the polarity right and not short out any component while soldering. Don't forget to include the capacitor if you're using one.<br> Solder up wires to the VTX, if it arrived unsoldered. If you're using the Zeus Nano as I did, you can snip off all but the closest mounting points, and mount to the built in holes of in the rear part of the drone. The screws go directly into the plastic. Make sure you mount with the antenna port facing up, and the edge with the wires facing back. If you are not using the Zeus Nano, you can edit the .step files to fit your VTX or just kinda mush it in there and hope for the best.<br> Now, lower the ESC module into place and thread through the four M2x20 screws, pop on the flight controller part of the stack too.<br> Using the tweezers, carefully solder the VTX wires to their proper spots on the flight controller. You'll need a wiring diagram to know what goes were, and any manufacturer who knows what they're doing will provide one to you. <br> Excellent! We've got the flight stack and the VTX installed and wired up. <br> Secure the camera to the frame. Whichever one you end up choosing, it must be 19mm wide and have M2 mounting holes. Honestly the RunCam Phoenix 2 SE or RunCam Robin are both  perfect, highly recommend. <br> Solder the camera wires to their correct spot on the flight controller. <br> Lastly, the receiver. If it came with wires soldered on already, great! If not, solder them on yourself. I believe all ELRS receivers use 4 wires. Once you've done that, solder the connections to the flight controller.  If your receiver has a T-antenna, pop it out the two circular holes in the back of the drone.<br> With that, you've completed all of the electrical connections. Congrats!<br> You can line up the cover and tighten it down. <br> Ok ok ok. I know. There's still a lot of configuration to do, but you've just assembled a damn furious little wraith and you have my permission to feel proud. Now, betaflight is the name of the game and fortunately the setup thereof has gotten tremendously easier these past few years, so even a newbie is only liable to lose half his hair during the process. Find a guy named Joshua Bardwell on youtube. He was once a great help to me with his videos for beginners and he will be to you too. Soar high, my propped up comrades. </p>","has_more":false},"deferred":false}
